CHAIN LUBE FCL-330
Product Description
Applied Lubrication Technology Inc. Chain Lube FCL-330 was specifically developed to meet the extreme lubrication demands of Heat Treatment Furnace Chains which reach temperatures beyond the capabilities of even the best, non solid containing, synthetic lubricants. FCL-330 base stocks were carefully selected to satisfy film strength requirements, the need to effectively penetrate into the hot chains, and the ability to break down residue that is present from previously utilized lubricants. These base stocks not only penetrate and lubricate but also deliver the highly stable wear and friction reducing dispersion of ultrafine graphite particles to the chains wear points. This graphite coating provides boundary lubrication at temperatures up to 482°C (900°F). The highly refined base stock utilized in this lubricant was selected due to its ability to quickly penetrate the hot chains, while aiding to clean the chain surfaces and break down residue that is present from previously utilized lubricants. As the carrier delivers the solid film lubricant to the chains internal wear points it evaporates relatively quickly, therefore reducing the amount and longevity of smoking that occurs. Chain Lube FCL-330 contains a highly stable wear and friction reducing dispersion of ultrafine graphite particles which lubricate effectively at temperatures up to 482°C (900°F), and helps to prevent metal to metal contact.
The FCL-330 base stocks and additives are all Copper and Zinc free by design in order to comply with requirements of specific Heat Treatment Processes. Chain Lube FCL-330 is ideally applied by the ALT automatic lubrication system
Other advantages are as follows:
- Eliminates galling, seizing, stick-slip, and press-fit distortion.
- Reduces break-in time for new equipment.
- Prevents fretting.
- Protects against Corrosion.
Some of the important physical properties of this product are provided in the table below.
|
||||||||||
Product Applications
This higher viscosity lubricant has been specifically developed for the lubrication of Heat Treatment Furnace Chains and other chain applications that are subject to increased temperatures.
Product Packaging
Chain Lube FCL-330 is available in 20 liter pails, 200 liter drums, and 1200 liter returnable tote bin quantities.
Please note: All reasonable care has been taken to ensure that the information contained in this document is accurate as of the date of printing. However, such information may be affected by changes in the blend formulation occurring subsequent to the date of printing. Material Safety Data Sheets are available for all Applied Lubrication Technology Inc. products and must be consulted for appropriate storage, safe handling and disposal information of the product.
Lubricants:
Authorized Distributors of:
