PUMPS | METERING DEVICES | CONTROLLERS

SERIES PROGRESSIVE

Maximum Performance and Flexibility

Graco’s series progressive systems give you the most advanced centralized lubrication with numerous metering and accessory options available. Ideal for machining centers, forming presses or any application requiring precise lubrication. Get the information you need to ensure your machine is functioning at peak performance with the right amount of lubrication.

How it Works

As the lubricant flows through the passages of each block, the metering pistons move to one side in sequence from inlet to end, each time “dosing” the precise amount of lubricant. As long as the lubricant is flowing, the pistons are moving. If there are blocks or too much pressure for the system to overcome, the cycling stops and the system controller lets you know.

Benefits
  • Large number of outputs to handle a full range of oils and greases.
  • Most advanced and precise monitoring with overall system diagnostics plus troubleshooting at the lube point.
  • Flexible to dispense lubricants in multiple zones-you decide where and when to lubricate.
  • Covers the broadest range of small to large applications.
  • Most series available with NPSF, SAE or BSPP threads for worldwide adaptability.

System Versatility
  • Highly customizable.
  • Multiple zoning options.
  • Configure to any application.
  • Many pump choices.
  • Multiple feedback and controller options.

 

SERIES PROGRESSIVE SYSTEMS

 

PUMPS

Modu-Flo Grease & Oil Pumps



Features

  • Modu-Flo concept provides a proven, cost-effective way to assemble customized oil or grease lubrication systems that meet specific requirements by using standard modular components.
  • Modu-Flo increases opportunities to standardize lube system components and reduces lube maintenance and service costs.
  • Modu-Flo saves you system design dollars and lead time.
  • Modu-Flo components are dependable and backed by the industry’s most comprehensive international distributor network–with application expertise, stocked parts and factory-trained service nearby, whenever you are located.

Back to Top of Page

 

Electric Modu-Flo Grease & Oil Pumps



Description

The electric Modu-Flo II pump is a rugged electric motor driven positive displacement piston pump. It is designed for use with Trabon series progressive divider valves to lubricate all types of machinery using oil or grease up through NLGI #2. The electric Modu-Flo II pump is modular in design and utilizes Modu-Flo reservoirs, components and accessories. The assembly comes complete with electric motor and 20 ft. cable. The 24 VDC version is capable of delivering .29 cu.in./min. (4.7 cc/min.) at pressures up to 2500 psi (170 bar). The 115 VAC version is rated at .58 cu.in/min (9.5 cc/min.) at pressures up to 2500 PSI (170 bar).

Back to Top of Page

 

 

H-400 Electric/Hydraulic Drum Pumps



Description

These "original" container pumps utilize a 400 lb. (55 gal.) drum as their reservoir of grease. Eliminates time-consuming transfer and handling of lubricant. The H-400 Series is available in four different flow rates and can serve anywhere from 1 to 20 individual machines or Trabon Centralized Systems. Grease discharge is usually controlled by timer or "count control" adjustment. Pump is driven by a 1/2 hp motor which has power to deliver lubricant over long distances above or below ground. The H-400 pump comes equipped with a specially designed cover which slips over the top of a standard 400 lb. drum, includes as standard equipment pressure gauge and pressure switch to protect machinery.

Back to Top of Page

 

 

Tri-Lube Electric Pumps



Description

The Tri-Lube pump is a rugged, single or multiple-piston pump, driven by an electric motor. It is designed for use with Trabon Series Progressive Divider Valves, or may be connected directly to up to three individual lube points. Application is for all types of machinery using grease up through NLGI #2. The pump allows for mounting of one to three individual pumping elements, each having a fixed or adjustable output volume. (The standard version is provided with one pump element installed.) For applications where larger output volumes are required, the individual outputs from two or three pumping elements may be combined to a single output point. Each pumping element includes a pressure relief valve to protect the system against possible overpressure. Options include AC or DC electric motor, and two sizes of grease reservoirs (as listed in Specifications).

Back to Top of Page

 

 

Tri-Lube HD Electric Grease Pumps



Description

The Tri-lube H.D. electric motor driven grease pump package is designed for series progressive central lubrication systems on heavy duty construction, mining, or other mobile equipment.

The pump body can include from one to three fixed displacement cartridge piston pumps and a choice of reservoir capacities up to 45 lbs. This heavy duty pump is designed to deliver grease with consistencies rated up to NLGI #2 (dependent upon ambient temperature) at pressures up to 3500 psi (241 bar).

The rugged Tri-Lube H.D. package is corrosion protected and suitable for permanent outdoor installation where 24 volt DC power is available.

Back to Top of Page

 

 

METERING DEVICES

Trabon® MD Series


Off-the-shelf, compact series progressive
metering for tough-to-reach lubrication points

Features

  • The most compact, simple series progressive solution to get to those tough to reach lube points.
  • Pre-configured to dispense two to six points for a simple installation.
  • Available with a cycle indicator and/or a cycle switch for a complete, off-the-shelf
    series progressive solution.

Technical Specifications

Series MD-2 MD-3 MD-4 MD-6
Output per Outlet,
in³ (cm³)		 0.04 (0.66) 0.04 (0.66), Outlet 1
0.02 (0.33), Outlets 2 & 3		 0.02 (0.33) 0.01 (0.16)
Maximum Pressure,
psi (bar)		 3,000 (207) 3,000 (207) 3,000 (207) 3,000 (207)
Cycle Indication Optional Optional Optional N/A

Back to Top of Page

 

 

Trabon® MJ Series


Compact, customizable divider block series
well-suited for coil slitters or bottling lines

Features

  • Space-efficient—up to 16 points from one modular block.
  • Up to six different output amounts in three single or twin output block sizes.
  • Modular design for easy customizing—features include cross porting for larger
    volumes, cycle indication and simplified troubleshooting with performance indicators

Technical Specifications

Series MJ5 MJ10 MJ15
Maximum Pressure 2,000 psi (138 bar) 2,000 psi (138 bar) 2,000 psi (138 bar)
Output Twin Outlet,
in³ (cm³)		 0.005 (0.08) 0.01 (0.16) 0.015 (0.26)
Output Single Outlet,
in³ (cm³)		 0.01 (0.16) 0.02 (0.33) 0.03 (0.49)
Cycle Indication N/A Optional Optional

Back to Top of Page

 

 

Manzel® MH Series


The industry standard for natural gas
compressors

Features

  • Ideal for compressor and engine application or anywhere high pressure
    lubrication is required.
  • TFE seals standard in MHH valves for temperature and material compatibility.
  • SAE, NPSF or metric threading for worldwide compatibility.
  • Provides all the features and associated benefits of Graco’s MSP series, at pressures up to 7,500 psi (517 bar).

Technical Specifications

Series MH6 MH9 MH12 MH18 MH24 MH30
Maximum Pressure
MHP Valve		 6,000 psi
(413 bar)		 6,000 psi
(413 bar)		 6,000 psi
(413 bar)		 6,000 psi
(413 bar)		 6,000 psi
(413 bar)		 6,000 psi
(413 bar)
Maximum Pressure
MHH Valve		 7,500 psi
(517 bar)		 7,500 psi
(517 bar)		 7,500 psi
(517 bar)		 7,500 psi
(517 bar)		 7,500 psi
(517 bar)		 7,500 psi
(517 bar)
Output Twin Outlet,
in³(cm³)		 0.006
(0.098)		 0.009
(0.148)		 0.012
(0.197)		 0.018
(0.295)		 0.024
(0.393)		 0.030
(0.492)
Output Single
Outlet, in³(cm³)		 0.012
(0.197)		 0.018
(0.295)		 0.024
(0.393)		 0.036
(0.590)		 0.048
(0.787)		 0.060
(0.983)
Cycle Indication N/A N/A N/A Optional Optional Optional

Back to Top of Page

 

 

Trabon MSP Series


With the widest range of accessories and
outputs, MSP helps keep almost any
machine running at peak performance.

Features

  • The industry standard for complete modularity, Graco’s Trabon MSP series is our most customizable series progressive platform.
  • Porting options of NPSF, SAE or BSPP allow for worldwide adaptability.
  • Minimize down-time with quick change-out of the working section and a broad
    choice of performance indicators to help provide assurance that the lubrication is
    done right.
  • Precision matched piston fit ensures the system is delivering highly accurate
    amounts of lubricant repeatedly.
  • Optional TFE seals for maximum lubricant compatibility.

Technical Specifications

Series MSP5 MSP10 MSP15 MSP20 MSP25 MSP30 MSP35 MSP40
Maximum Pressure 3,500 psi
(241 bar)		 3,500 psi
(241 bar)		 3,500 psi
(241 bar)		 3,500 psi
(241 bar)		 3,500 psi
(241 bar)		 3,500 psi
(241 bar)		 3,500 psi
(241 bar)		 3,500 psi
(241 bar)
Output Twin Outlet in³ (cm³) 0.005 (0.08) 0.01 (0.16) 0.015 (0.26) 0.02 (0.33) 0.025 (0.41) 0.03 (0.49) 0.035 (0.57) 0.04 (0.66)
Output Single Outlet in³ (cm³) 0.01 (0.16) 0.02 (0.33) 0.03 (0.49) 0.04 (0.66) 0.05 (0.82) 0.06 (0.98) 0.07 (1.15) 0.08 (1.31)
Cycle Indication N/A N/A N/A Optional Optional Optional Optional Optional

Back to Top of Page

 

 

Trabon MX Series


The large volume needed for today’s pulp and
paper mill applications with a compact design.

Features

  • Compact design able to lubricate large bearings.
  • Delivers up to 0.3 in3 (4.92 cm3) per cycle and has a wide range of accessories to monitor critical lubrication points.

Technical Specifications

  MX25 MX50 MX75 MX100 MX125 MX150
Maximum Pressure 3,000 psi
(207 bar)		 3,000 psi
(207 bar)		 3,000 psi
(207 bar)		 3,000 psi
(207 bar)		 3,000 psi
(207 bar)		 3,000 psi
(207 bar)
Output Twin Outlet in³ (cm³) 0.025 (0.41) 0.05 (0.82) 0.075 (1.23 0.1 (1.64) 0.125 (2.05) 0.15 (2.46)
Output Single Outlet in³ (cm³) 0.05 (0.82) 0.1 (1.64) 0.15 (2.46) 0.2 (3.28) 0.25 (4.1) 0.3 (4.92)
Cycle Indication N/A Optional Optional Optional Optional Optional

Back to Top of Page

 

 

Trabon MXP Series


The large volume needed for today’s pulp and
paper mill applications with a compact design.

Features

  • Able to customize with greater output volumes to meet those large machine
    lubrication requirements.
  • Delivers lubricant to up to 20 points from a single assembly—combine assemblies
    for a maximum of 400 lubrication points.
  • SAE, NPSF or metric threading for worldwide compatibility.
  • Up to six different output amounts in three single or twin output block sizes.

Technical Specifications

  MX25 MX50 MX75 MX100 MX125 MX150
Maximum Pressure 3,000 psi
(207 bar)		 3,000 psi
(207 bar)		 3,000 psi
(207 bar)		 3,000 psi
(207 bar)		 3,000 psi
(207 bar)		 3,000 psi
(207 bar)
Output Twin Outlet in³ (cm³) 0.025 (0.41) 0.05 (0.82) 0.075 (1.23 0.1 (1.64) 0.125 (2.05) 0.15 (2.46)
Output Single Outlet in³ (cm³) 0.05 (0.82) 0.1 (1.64) 0.15 (2.46) 0.2 (3.28) 0.25 (4.1) 0.3 (4.92)
Cycle Indication N/A Optional Optional Optional Optional Optional

Back to Top of Page

 

 

 

CONTROLLERS

TC-1000



Description

The TC-1000 Solid State Timer/Counter is a microprocessor based multi-use controller dedicated to the operation of centralized lubrication systems.

The TC-1000 schedules lube frequency either on a time or stroke/cycle basis in values ranging from 1-9999. The pump run interval is also selectable in time or counts over the same range.

The TC-1000 is easily programmed in the field using four mini push buttons. No special training or knowledge of computer language is necessary. During power down or outage, data is saved in EEPROM (Electrically Erasable Programmable Read Only Memory). When power is restored, counting and pump status is restored to values prior to loss of power.

Available for 115 VAC, 230 VAC, 12 VDC, or 24 VDC operation. Pump Output voltage is the same as supply voltage.

Back to Top of Page

 

LC-1000



Description

The Trabon microprocessor based LC-1000 Controller is a multiuse solid state controller that is dedicated to the operation and monitoring of intermittent operating series and parallel centralized lubrication systems equipped with a cycle or pressure switch for cycle completion feed back.

The LC-1000 monitors and schedules lubrication intervals in either time or stroke/cycle basis in values ranging from 1 to 9999. Pump may be self cycling or single cycle type requiring a pulsed output.

Four units are available for 12 VDC, 24 VDC, 115 VAC, or 230 VAC operation. The LC-1000 is easy to program in the field using four mini push-buttons. The programming requires no special nowledge or training of computer language. During power down or outage, all data is saved in EEPROM (Electrically Erasable Programming Read Only Memory). As power is restored, counting and pump status are restored to values prior to the loss of power.

Back to Top of Page

 

 

WMP III Maxi-Monitor



Description

The WMP Ill Maxi-Monitor is a micro processor based controller, dedicated to the operation and monitoring of a centralized lubrication system. WMP Ill is designed to schedule lube intervals and monitor the operation of Trabon pumps and divider valves in intermittent operating systems.

The WMP Ill can control lube schedules on either a time or a machine stroke/cycle basis. It will also continuously monitor and display the status of the lube system it is controlling. It can even protect the equipment by shutting down the operation when a lube system fault does occur.

System performance can easily be determined through LED’s (Light Emitting Diodes) and also by a two line, 16 character alphanumeric LCD (Liquid Crystal Display) in conjunction with the key pad.

The WMP Ill is easily programmed in the field. No special training or knowledge of computer language is necessary. Programming is simply a matter of inputting parameters and selecting or bypassing options as prompted by the LCD.

Available in either 115 VAC, 230 VAC, 12 VDC or 24 VDC.

Back to Top of Page

 

 

Multi Purpose Controller



Description

The Lubriquip Multi-Purpose Controller™ (MPC) is a microprocessor based controller designed to operate, monitor, and control all types of centralized lubrication systems. The MPC™ can be used in Series-Progressive, Injector, Piston Distributor, Dual-Line, and Air/Oil types of lubricant distribution systems for scheduling the lubricating cycles and then monitoring for the successful operation of the lube system’s pump and distributing devices. It can be used on either a single system or two independent lubrication systems.

Back to Top of Page